Tygon® Inert Tubing

Chemically resistant and non- contaminating, Tygon® Inert Tubing provides the outstanding clarity and flexibility of Tygon® tubing, combined with the inertness of a fluoropolymer.

Formulation SE-200

Without sacrificing the flexibility, glass-like clarity or outstanding bend radius for which Tygon® tubing is known, Tygon® Inert Tubing can handle many applications where flexible tubing of the past could not be used. Its FEP inner liner provides the ultimate in chemical resistance and can handle a wide variety of fluids from corrosives to MEK-based solvents. The liner is inert, meaning it will not extract or contaminate fluids being transferred. The fluid path will not impart odor or taste, making it well-suited for food and beverage use. It meets FDA criteria for food and beverage applications.

Tygon® Inert Tubing combines all the benefits of Tygon® with the inertness of a fluoropolymer, providing superior performance in many applications and industries.

Click here to view a data sheet with complete size chart.

 


Features/Benefits
  • Crystal clear for easy visual flow monitoring
  • Better flexibility than typical rigid fluoropolymer tubings
  • Chemically resistant and inert
  • Non-contaminating fluid path
  • Contains no chemicals listed in California’s Prop 65
  • Phthalates-free
Typical Applications
  • Chemical Processing
  • Pharmaceutical Processing and filling
  • Paint and Solvent Production and Packaging
  • Adhesive transfer lines
  • Semiconductor Processing
  • Photographic Processing Equipment
  • Beverage Dispensing
  • Ink and Toner Feed Lines
  • Fertilizer and Pesticide  Distribution

 

Tygon® SE-200 Tubing Typical Physical Properties
PropertyASTM Method Value or Rating
Durometer Hardness - Shore A, 15 sec D2240 66
Tensile Strength - psi (MPa) D412 2,200 (15.2)
Ultimate Elongation, % D412 390
Tear Resistance - lb-f/inch (kN/m) D1004
250 (43.8)
Specific Gravity D792 1.21
Water Absorption, % - 24 hours @ 73ºF (23ºC) D570 <0.01
Compression Set Constant Deflection, % - @ 158ºF (70ºC) for 22 hours D395 - Method B 59
Brittleness Temp - ºF (ºC) D746 -32 (-36)
Max Recommended Operating Temp - ºF (ºC) - 165 (74)
Tensile Stress @ 200% Elongnation, psi (MPa) - 1,379 (9.5)
Tensile Set, % D412 57
Color - Clear

Unless otherwise noted, all tests were conducted at room temperature (73ºF). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

For complete compliance information, visit www.processsystems.saint-gobain.com

STI is a Member or Affiliate of: