Fluoropolymer (PTFE) Rubber Coated TLCTCO Series Hose Assemblies

TLCTCO Hose Assemblies are made:
  • Inner Tube:  Chemfluor® FEP

  • Cover:  Convuluted EPDM Rubber.

  • Reinforcement:  Multiple polyester plycord and EPDM ruber.

  • Double helix, high tensile strength carbon steel wire.

 

Temperature Rating

-40°F to +350°F
-40°C to +177°C

Features:
  • Reduced force-to-bend
  • Improved bend radius
  • Ultra flexible, easy to handle, kink resistant
  • Smooth ID when bent
  • High pressure rating
  • Sterilizable and autoclavable
  • Non-aging liner
  • Full vacuum rated 29.9" mg (mercury)
  • Imparts no taste or odor
  • Resistant to chemicals, ozone and abrasion
Typical Applications:
  • Load cells
  • Skid transfer
  • Pumping stations/ portable pumps
  • Vessel or tank transfer
  • Rail car loading/ unloading
  • Transfer lines
  • Chemical process lines
Connections:
  • Permaseal® Crimp style fittings
  • Standard 316L stainless steel (wetted surfaces)
  • Wide range of materials available
Approvals:
  • FDA per 21CFR177.1550
  • US Pharmacopeia case VI

 

TLCTCO Series Hose Specifications
Part Number
Hose Size I.D. in.
Hose Size I.D. MM
Hose Size O.D., in.
Hose Size O.D., MM
Max. Working Pressure (PSI)
Min. Burst Pressure (PSI)
Wt. Per Ft. (LB)
12TLCTCO
3/4 19.1 1 1/4 31.8 400 1600 .92
16TLCTCO
1 25.4 1 1/2 38.1 350 1400 1.12
24TLCTCO
1 1/2
38.1 2 52.1 300 1200 1.79
32TLCTCO
2
50.8 2 5/8 67.3 250 1000 2.24
40TLCTCO 2 1/2 63.5 3 1/4 81.3 200 800 3.50
48TLCTCO 3 76.2 3 3/4 94.0 150 600 3.73
64TLCTCO
4
101.60 4 3/4 119.4 150 600 5.36

 

Burst Pressure ratings at ambient 70ºF (21ºC). See applicable notes below on vacuum/pressure ratings at temperatures other than ambient.
Working Pressure is given @ 70ºF; Decrease working pressure 1% for every 2ºF above 212ºF.
Vacuum Rating is given @ 70ºF; Decrease vacuum rating 1% for every 2ºF above 212ºF. For 1-1/2" and larger sizes, vacuum rating decreases when installed less than 2X min. bend radius.
Flare-Thru fittings are pressure rated only. Not rated for vacuum service.
Extended Service Life Tip: Flexible Components suggests using full-length anti-kink armor casing or at least 16" to 24" long anti-kink cuffs (see Hose Cover Options) at each fitting end to help reduce the strain on the crimp collar and fittings in high load installations. Prolonged service at elevated temperatures will reduce total service life.

STI is a Member or Affiliate of: