Gauge Reducers


A full line of concentric reducers that are machined from 316L stainless steel and eliminate cones and welding to modify in-line sanitary tubing systems is available.

The gauge reducers are machined from 316L stainless steel, electropolished to a 20 Ra I.D. surface finish and are only 1.25" long. Featuring one-piece construction and a smooth bore to prevent entrapments, these short concentric reducers are supplied with a single material certification for full traceability.

Designed to save space when reducing or increasing tubing sizes, these reducers are available off the shelf in 28 standard combinations of Tri-Clamp® sizes from 1/2" to 4" O.D. Ideal for clean room environments, they are an ideal replacement for conventional welded concentric reducers which are typically 3" to 12" long.

Notes:
  • Material 316L Stainless Steel
  • 20 Ra. Finish
  • Electroplated
  • Material Certifications Supplied
A
Overall Length
B
Inside Dim.
C
Tri-Clamp®
Size
D
Tri-Clamp®
Size
Part #
1.25" .370 1/2" 3/4" GA-08111211-EP
1.25" .370 1/2" 1" GA-08111610-EP
1.25" .370 1/2" 1-1/2" GA-08112410-EP
1.25" .370 1/2" 2" GA-08113210-EP
1.25" .370 1/2" 2-1/2" GA-08114010-EP
1.50" .370 1/2 3" GA-08114810-EP
1.75" .370 1/2" 4" GA-08116410-EP
1.25" .620 3/4" 1" GA-12111610-EP
1.25" .620 3/4" 1-1/2" GA-12112410-EP
1.25" .620 3/4" 2" GA-12113210-EP
1.25" .620 3/4" 2-1/2" GA-12114010-EP
1.50" .620 3/4" 3" GA-12114810-EP
1.75" .620 3/4" 4" GA-12116410-EP
1.25" .870 1" 1-1/2" GA-16102410-EP
1.25" .870 1" 2" GA-16103210-EP
1.25" .870 1" 2-1/2" GA-16104010-EP
1.50" .870 1" 3" GA-16104810-EP
1.75" .870 1" 4" GA-16106410-EP
1.25" 1.370 1-1/2" 2" GA-24103210-EP
1.25" 1.370 1-1/2" 2-1/2" GA-16103210-EP
1.50" 1.370 1-1/2" 3" GA-24104810-EP
1.50" 1.370 1-1/2" 4" GA-24106410-EP
1.25" 1.870 2" 2-1/2" GA-32104010-EP
1.25" 1.870 2" 3" GA-32104810-EP
1.50" 1.870 2" 4" GA-32106410-EP
1.25" 2.370 2-1/2" 3" GA-40104810-EP
1.50" 2.370 2-1/2" 4" GA-40106410-EP
1.25" 2.870 3" 4" GA-48106410-EP

 

 

STI is a Member or Affiliate of: